Home / News / A Guide to Trigger Sprayers

A Guide to Trigger Sprayers

Update:21 Jul
  Plastic trigger sprayers were first used as spray pumps to allow a variety of commercial and household liquid products to be distributed to households through retail stores. Trigger sprayers are usually made of a variety of plastics and can be used for water-based and chemical liquids. The trigger sprayer is connected to a compatible spray bottle, and when the consumer squeezes the pump handle on the trigger, the contents can be dispersed.
  The most common use of trigger sprayers is for household cleaning products such as disinfectants, floor and surface cleaners. This has been especially true in the past year due to the COVID-19 pandemic. The demand for trigger sprayers for disinfectants and cleaning products will increase significantly in 2020.
  Benefits of trigger nebulizer
  One of the main benefits of using a trigger sprayer is the ability to control the amount of content dispensed. The nozzle can be adjusted to produce a fine spray or jet for dispensing liquid. Another benefit is that the trigger sprayer comes in a variety of colors and sizes. This makes it easier for consumers to identify different products.
  Precautions for using trigger sprayers
  As can be seen from the figure, the entire trigger sprayer system consists of 12 components. According to your product needs, many of these components can be made of multiple materials. It is important to review each of these components to ensure that you choose the best system for your product. Please continue reading below for more detailed information on some of the things to consider when choosing a trigger sprayer.
  Your product and output
  The first thing to consider is to determine what type of product you will use the trigger sprayer to dispense. Certain components are only compatible with the specific material of the component, such as balls, dip tubes, etc. According to your product, you also need to determine the output of the sprayer you need. The output range is usually 0.7cc to 1.6cc.
  Understand the filling process
  You need to be familiar with the filling process of the product to make the best choice. Whether you use a manual or automatic filling line, you need to follow different specifications.
  Consider dip tube
  The dip tube is an important part of the trigger sprayer and cannot be ignored. According to the size of the bottle you use, you need to customize the length of the dip tube. In addition, you also need to consider the rigidity of the dip tube you need, and choose a material that meets your needs.